It’s been a while since an update was last provided for this transceiver, but this looks to have quite a few enhancements and fixes provided so that is probably why.
From the release notes:
V1.1.6 Release Note Image File SHA256: 1D5D97118E34963B0BA338CD974BD456577E21475F487F0154D9537112A8A64B APP: V1.1.6 Nov 2 2022,13:10:22 BASE: V1.1.6 Nov 1 2022,17:37:32 1. Add CI-V instruction: 1A 01 (C1) (C2) C1: band index, See IC-705 CI-V Command Table C2: bandstack register number(not use), See IC-705 CI-V Command Table X6100 send back description FE FE # 2 byte, CI-V header E0 XX 1A 01 01 01 # 6 bytes, The command payload, XX is the rig's address 00 00 80 01 00 # 5 bytes, Operating frequency setting 03 02 # 2 bytes, Operating mode setting 00 # 1 byte, Data mode setting 00 # 1 byte, Duplex and Tone settings 00 # 1 byte, Digital squelch setting 00 08 85 # 3 bytes, Repeater tone frequency setting 00 08 85 # 3 bytes, Repeater tone frequency setting 00 00 23 # 3 bytes, DTCS code setting 00 # 1 byte, DV Digital code squelch setting 00 50 00 # 3 bytes, Duplex offset frequency setting 58 36 31 30 30 20 20 20 # 8 bytes, UR (Destination) call sign setting 20 20 20 20 20 20 20 20 # 8 bytes, R1 (Access repeater) call sign setting 20 20 20 20 20 20 20 20 # 8 bytes, R2 (Gateway/Link repeater) call sign setting FD # 1 byte, CI-V tail 2. Add CI-V instruction: 1A 06 See IC-705 CI-V Command Table 3. Add CI-V instruction: 21 00 21 01 21 02 See IC-705 CI-V Command Table 4. Add CI-V instruction: 26 (C1) (C2) (C3) (C4) C1: VFO index 0: Foreground VFO other: Background VFO C2: Operating mode See IC-705 CI-V Command Table C3: Data mode 0: OFF other: ON C4: Filter setting 1: FILTER1 2: FILTER2 3: FILTER3 other: Invalid *Note: [LSB/USB mode] with Data mode ON -> L-DIG/U-DIG [Other operating mode] with Data mode ON -> No effect 5. Add bluetooth SPP, virtual serial port for FLRIG, Omni-Rig or other CI-V based software 6. Fix the Fc marker bug in modem mode (there will be two markers in the audio FFT scope in some cases) 7. Optimize the fw updating process via sd card, the user data (configures, voices, channels) will not be cleared after updating 8. Some adjustments of the main window 8.1 Add LOCAL TIME / UTC TIME widget 8.2 Add RIT / XIT widget 8.3 Add audio oscilloscope 8.4 Add filter icon (shows filter group as will) 9. Add auto-level for the waterfall 10. Fix bluetooth issue (stuck in the startup screen or the bluetooth setting window) 11. Fix ntp update issue (make sure X6100 can access to the internet via built-in WiFi or USB to Ethernet dongle) 12. Show MAC address in the Bluetooth / WiFi setting windows (in the title of the window) 13. Optimize the TIME SETTING operation logic 14. Optimize the FFT SPAN (or FFT ZOOM), now it has four items: 100k,50k,25k,12.5k 15. Optimize the "Flat-Menu" operation logic, Press "MFK" to select the current item to the fast-access tag and return to the main window example 1: In "RADIO SETTING1" page, "TX POWER" is selected, press "MFK" then "TX POWER" is added to the fast-access tag example 2: In "DISPLAY SETTINGS" page, "FFT SPAM" is selected, press "MFK" then "FFT SPAM" is added to the fast-access tag *Note: "selected" means the item get the focus 16. Optimize AGC algorithm 16.1 AGC time constant is more accurate 16.2 Background noise is much lower without antenna plugged in (except FM mode) Tips & Note: #### Most of the CI-V instructions compatible with ICOM-705 #### Ham Radio Deluxe may not recognize the bluetooth virtual serial port #### Serial port remap (could be critial when working with the bluetooth virtual serial port): Why remap: FLRIG/WSJTDX/JTDX may fail to connect to the bluetooth virtual serial port (due to the mechanism of rfcomm itself) Roadmap and Tools: com0com: 1) install com0com 2) Run "Setup Command Prompt" (the CLI for com0com) install protname=COMxxx - xxx is the port number, choose a unoccupied one, for example: 88 3) Close the CLI hub4com: 1) Enter hub4com dir, looks like this: X:\hub4com-184.108.40.206-386> 2) Input the command in the MS CLI hub4com --route=All:All \\.\COMyyy \\.\CNCB0 COMyyy is the bluetooth virtual serial port number, for example: COM4 hub4com --route=All:All \\.\COM4 \\.\CNCB0 The CLI's output should be look like the below: COM4 Open("\\.COM4", baud=19200, data=8, parity=no, stop=1, octs=on, odsr=off, ox=off, ix=off, idsr=off, ito=0) - OK CNCB0 Open("\\.CNCB0", baud=19200, data=8, parity=no, stop=1, octs=on, odsr=off, ox=off, ix=off, idsr=off, ito=0) - OK Route data COM4(0) --> CNCB0(1) Route data CNCB0(1) --> COM4(0) Route flow control COM4(0) --> CNCB0(1) Route flow control CNCB0(1) --> COM4(0) Started COM3(0) Started CNCB0(1) FLRIG/WSJTDX/JTDX: 1) Com port for CI-V should be the one we choose in the com0com, which in this case would be COM88
I have just downloaded and haven’t applied it yet, but will circle back if anything seems significantly improved.
You can download the latest from this link https://www.radioddity.com/pages/xiegu-download